shows equus seems

eService – Report damaged streetlights  Click a vehicle warning light to see more detailed information. The purpose of this paper is to elucidate light pollution as a normative concept, and focus specifically on its increasing role in shaping, or framing, future regulatory efforts, and decision-making processes. The goal is not to condemn or approve of the use of light pollution from an ethical perspective, nor is it to arrive at definitive answers for the ambiguities inherent in the concept. Rather, I begin by accepting the term as the dominant concept for describing a novel environmental problem, and critically reflect on its ethical significance and potential limitations. While the implications of light pollution are far-reaching, here I will focus specifically on light pollution as it relates to urban nighttime lighting. Such an analysis can be seen as an example of an issue discussed within this journal by Elliott (2009 Elliott, K. (2009). The ethical significance of language in the environmental sciences: Case studies from pollution research. Ethics, Place & Environment, 12, 157–173.10.1080/13668790902863382[Taylor & Francis Online] [Google Scholar]), namely the ethical significance of language and terminology choices for framing environmental policy decisions and debates. While Elliott discusses very different types of pollution, the themes highlighted are quite relevant for an examination of light pollution. Elliott—who draws from a more pragmatic branch of environmental ethics that I adopt here—describes the usefulness of practical ethics for policy discussions. Philosophers can help to create and define the moral space within which policy decisions will be made, and so can contribute to upstream policy decisions. Elliot (2009 Elliott, K. (2009). The ethical significance of language in the environmental sciences: Case studies from pollution research. Ethics, Place & Environment, 12, 157–173.10.1080/13668790902863382[Taylor & Francis Online] [Google Scholar], p. 170) explains that, The use of full cutoff fixtures help to reduce sky glow by preventing light from escaping above the horizontal. Full cutoff typically reduces the visibility of the lamp and reflector within a luminaire, so the effects of glare are also reduced. Campaigners also commonly argue that full cutoff fixtures are more efficient than other fixtures, since light that would otherwise have escaped into the atmosphere may instead be directed towards the ground. However, full cutoff fixtures may also trap more light in the fixture than other types of luminaires, corresponding to lower luminaire efficiency, suggesting a re-design of some luminaires may be necessary. If the check engine light illuminates, it will either blink or remain constantly illuminated, depending on the problem. A blinking light, or in some cars a red light instead of a yellow or orange light, indicates a problem that needs immediate attention. Either way, you should have the vehicle checked by a mechanic.  When reporting a lighting fault to us it would be helpful if you could supply: In 2007, “shift work that involves circadian disruption” was listed as a probable carcinogen by the World Health Organization’s International Agency for Research on Cancer. (IARC Press release No. 180).[41][42] Multiple studies have documented a correlation between night shift work and the increased incidence of breast and prostate cancer.[43][44][45][46][47][48] One study which examined the link between exposure to artificial light at night (ALAN) and levels of breast cancer in South Korea found that regions which had the highest levels of ALAN reported the highest number of cases of breast cancer.  Seoul, which had the highest levels of light pollution, had 34.4% more cases of breast cancer than Ganwon-do, which had the lowest levels of light pollution. This suggested a high correlation between ALAN and the prevalence of breast cancer.It was also found that there was no correlation between other types of cancer such as cervical or lung cancer and ALAN levels.[49] A newer method for predicting and measuring various aspects of light pollution was described in the journal Lighting Research Technology (September 2008). Scientists at Rensselaer Polytechnic Institute’s Lighting Research Center have developed a comprehensive method called Outdoor Site-Lighting Performance (OSP), which allows users to quantify, and thus optimize, the performance of existing and planned lighting designs and applications to minimize excessive or obtrusive light leaving the boundaries of a property. OSP can be used by lighting engineers immediately, particularly for the investigation of glow and trespass (glare analyses are more complex to perform and current commercial software does not readily allow them), and can help users compare several lighting design alternatives for the same site.[100] Light pollution is a side-effect of industrial civilization. Its sources include building exterior and interior lighting, advertising, outdoor area lighting (e.g. car parks/parking lots), offices, factories, streetlights, and illuminated sporting venues. It is most severe in highly industrialized, densely populated areas of North America, Europe, and Japan and in major cities in the Middle East and North Africa like Tehran and Cairo, but even relatively small amounts of light can be noticed and create problems. Awareness of the deleterious effects of light pollution began early in the 20th Century (see e.g. Beston[8]), but efforts to address effects did not begin until the 1950s.[9] In the 1980s a global dark-sky movement emerged with the founding of the International Dark-Sky Association (IDA). There are now such educational and advocacy organizations in many countries worldwide. Several different types of light sources exist, each having different properties that affect their appropriateness for certain tasks, particularly efficiency and spectral power distribution. It is often the case that inappropriate light sources have been selected for a task, either due to ignorance or because more sophisticated light sources were unavailable at the time of installation. Therefore, badly chosen light sources often contribute unnecessarily to light pollution and energy waste. By re-assessing and changing the light sources used, it is often possible to reduce energy use and pollutive effects while simultaneously greatly improving efficiency and visibility. If you’ve noticed an outdoor light within our service area that’s in need of maintenance, please complete and submit the form below. Like light waves, water waves emerging from two sources interferes in the space surrounding the sources to produce a pattern of nodes and antinodes lying along lines. The diagram at the right represents the interference pattern created by two water waves. The waves were created by two objects bobbing up and down in phase at the same frequency. Point P on the pattern is a distance of 34.0 cm from S1 and 23.8 cm from S2. Determine the wavelength (in cm) of the water waves. Disadvantages of low pressure sodium lighting are that fixtures must usually be larger than competing fixtures, and that color cannot be distinguished, due to its emitting principally a single wavelength of light (see security lighting). Due to the substantial size of the lamp, particularly in higher wattages such as 135 W and 180 W, control of light emissions from low pressure sodium luminaires is more difficult. For applications requiring more precise direction of light (such as narrow roadways) the native lamp efficacy advantage of this lamp type is decreased and may be entirely lost compared to high pressure sodium lamps. Allegations that this also leads to higher amounts of light pollution from luminaires running these lamps arise principally because of older luminaires with poor shielding, still widely in use in the UK and in some other locations. Modern low-pressure sodium fixtures with better optics and full shielding, and the decreased skyglow impacts of yellow light preserve the luminous efficacy advantage of low-pressure sodium and result in most cases is less energy consumption and less visible light pollution. Unfortunately, due to continued lack of accurate information,[92] many lighting professionals continue to disparage low-pressure sodium, contributing to its decreased acceptance and specification in lighting standards and therefore its use. Another disadvantage of low-pressure sodium lamps is that some people find the characteristic yellow light very displeasing aesthetically.[citation needed] If you are reporting a hazardous condition (other than a malfunctioning light) DO NOT use this form. Please call 1-800-4OUTAGE (1-800-468-8243) to report the condition. What all definitions have in common—either explicitly or implicitly—is the goal of establishing a base upon which the negative effects of artificial nighttime illumination can be categorized. Toward this end, Gallaway’s definition opens us to the broader range of concerns embodied by the contemporary usage of the term—light pollution is not meant to condemn nighttime lighting as a whole, but rather specific uses and outputs of artificial lighting. These negative or undesired aspects of nighttime lighting can be subdivided into four categories: skyglow, glare, light trespass, and clutter.66. These four categories of light pollution are used (although with slightly different terms) by the International Dark-Sky Association, and cited elsewhere as well (e.g. Morgan-Taylor, 2014 Morgan-Taylor, M. (2014). Regulating light pollution in Europe: Legal challenges and ways forward. In J. Meier, U. Hasenöhrl, K. Krause, & M. Pottharst (Eds.), Urban lighting, light pollution and society (pp. 159–176). New York, NY: Taylor & Francis. [Google Scholar]). As such, I am accepting these as the standard causes of light pollution.View all notes Skyglow is light sent upward (directly or reflected) and scattered in the atmosphere, causing artificial ambient brightness and decreasing stellar visibility (Mizon, 2012 Mizon, B. (2012). Light pollution: Responses and remedies (2nd ed.). New York, NY: Springer.10.1007/978-1-4614-3822-9[Crossref] [Google Scholar]). This is the orange haze often seen above cities, and the largest burden for astronomy. It has also arguably been the dominant focus of efforts to quantify light pollution, as some landmark studies rely on satellite imagery (e.g. Cinzano, Falchi, & Elvidge, 2001 Cinzano, P., Falchi, F., & Elvidge, C. D. (2001). The first world Atlas of the artificial night sky brightness. Monthly Notices of the Royal Astronomical Society, 328, 689–707.10.1046/j.1365-8711.2001.04882.x[Crossref], [Web of Science ®] [Google Scholar]). The other three forms of light pollution are more commonly experienced hinderences in daily life: glare occurs when excessive brightness reduces visibility (e.g. a floodlight at eye level), light trespass is unwanted or unintended light (e.g. light shining into your bedroom window at night), and clutter is caused by over-illuminated clusters of light sources (e.g. signage and advertising) (IDA, 2014 IDA. (2014). International Dark-Sky Association. International Dark-Sky Association. Retrieved 15 January, 2015, from https://darksky.org/ [Google Scholar]; Morgan-Taylor, 2014 Morgan-Taylor, M. (2014). Regulating light pollution in Europe: Legal challenges and ways forward. In J. Meier, U. Hasenöhrl, K. Krause, & M. Pottharst (Eds.), Urban lighting, light pollution and society (pp. 159–176). New York, NY: Taylor & Francis. [Google Scholar]). Celuraid Muscle Atlant Gel Celuraid Muscle power up premium erozon max Maxman Maxman Celuraid Muscle TestX Core Atlant Gel

kalwi

Helooo